Expert Answers about GMC Lift Supports
- Jack Stands Needed to Install RoadActive Suspension Kit on 2020 Ford F-150
- A 2-Ton jack stand like # PTW41021 would be perfect. The # PTW41021 stands provide between 10-3/4 and 16-3/4 inches of lift that would be ideal for installing the # RAS3611-YHD RoadActive Suspension kit
view full answer... - How to Lift Class B Motorhome Off Ground to Protect Tires and Suspension for Full-Time Occupancy
- Lifting your parked RV will help protect your tires from flat spots but stabilizer jacks like # UF48-979002 or # TJ01RT-HD are not suitable since they are not designed to handle the entire weight of the RV, only to support/stabilize a portion of it.
A better solution is the TrailerLegs Tire Saver Stands # 326-TRLLG-4 which support the RV by the axles. The stands take all load off the tires which will prevent bends to the steel belts; bending of the belts is non-reversible. The stands will...
view full answer... - Trailer Jacks for Stabilizing and Lifting 5th Wheel Trailer
- When you need to remove a hub from your 5th wheel trailer to do wheel bearing inspection and re-packing you'll want to use a jack that lifts the trailer at the I-beam at the side of the frame. Scissor jack stabilizers like # UF48-979002 are not meant for lifting so much as for supporting a portion of the trailer's weight. You certainly CAN use a scissor jack to stabilize the trailer at camp.
A safer way to remove your wheel and hub is the Andersen Rapid Jack # AM3620 or the Blaylock #...
view full answer... - Trailer Jack To Support 6X12 Trailer Weighing 2,500 Plus Pounds
- Yes, The Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B would be able to lift your trailer from the side to change a flat tire.
The jack has a 7,000 pound lift capacity and has a 8,000 pound support capacity. The jack has a weld-on installation.
I attached a review video link below.
view full answer... - Are Spacers Needed to Install Air Helper Springs on 2019 Ram 3500 With 1 Inch Lift in Rear
- According to Air Lift, you won't need a spacer for only a 1 inch suspension lift. They don't even offer a lift that small, so you'll be just fine.
For a LoadLifter 7500 XL kit that offers up to 7500 lbs of support, the # AL57531 Air Helper Spring Kit you'd looked at would be a great choice. For 5000 lbs of support, go with # AL57231. Both would be a fit for your truck UNLESS you have the factory air suspension.
You might also want to consider an on-board compressor system like # AL25856...
view full answer... - Rear Suspension Enhancement Product for 2019 Ford F-150
- If your weight distribution system is set up properly, and you're using the correct system whose capacity can handle the fully loaded tongue weight of your trailer, you shouldn't still have a much of a problem with the rear suspension sagging.
Before purchasing a rear suspension product, I'd recommend consulting the installation instructions and revisiting the setup procedure for the weight distribution system you're using to ensure that everything's been set up properly. I'd also recommend...
view full answer... - Trailer Suspension Lift Kit for 2017 Airstream Sport 22 Single Axle Travel Trailer
- A bolt-on axle over-under kit like # K71-384-00 and # K71-385-00 will typically give your trailer between 4 and 5-inches of lift. The exact amount of lift depends on the axle diameter and the height of the leaf spring stack. Lift will be the sum of the axle diameter plus the height of the spring stack. Kit # K71-385-00 works for axles with 3-inch diameter
Installing an axle over-under lift kit on a trailer is not a complex job but it does require the right safety equipment to avoid risk...
view full answer... - Should I Use the Air Lift 1000 Air Bags If I've Already Got a Weight Distribution Hitch
- Yes. A weight distribution hitch is always a great solution for helping re-distribute the tongue weight of your trailer over both axles of your 2016 Ram 1500, but there are instances where the tongue weight is still causing some sag. When this occurs, or you just want a second layer of support, adding an air bag like the Air Lift 1000 # AL60818HD to your rig is a great choice. These air bags work to help provide support to your coil spring suspension and just give you a little extra help...
view full answer... - Air Bag Suspension System Options and Rear View Camera for a 2017 Toyota Sienna
- I would be happy to answer those questions for you. The Air Lift 1000 Air Helper Springs for Coil Springs item # AL60732 provide 1,000 lbs of support. Anything over that maxes out the system and it won't work as well. It is recommended not to exceed this capacity. The Firestone Coil-Rite Air Helper Springs item # F4155 is a nearly identical kit with the exception of the valves. With cost and availability being practically identical I would choose the Firestone kit over the Air Lift because...
view full answer... - Do Nut & Bearing Come Separate For Ram/etrailer 12k Support/10k Lift Square Jack
- The replacement nut and bearing for the Ram/etrailer 12k support/10k lift square jacks are not available separately as they are only packaged together with the shaft:
- Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT
As for the roll pins, they are also available, but are come in the package with replacement gears:
- Replacement Sidewind Gear Kit # TJD-12000-GR
While I know this isn't what you were looking to hear, you will have some extra parts...
view full answer... - What Is The Lift Capacity Of The Square Direct Weld Jack # TJD-7000S
- Yes, The Square Direct Weld Jack w/ Footplate # TJD-7000S can lift 7,000 pounds from the lowest position 24-3/4 inches retracted to the highest position 40-1/8 inches extended.
The jack has a support capacity of 8,000 pounds. The jack has a weld-on installation and has a black painted outer tube and a zinc finished inner tube and footplate that is corrosion resistance.
I attached a review video link below.
view full answer... - Air Helper Springs and Compressor for a 2001 F-53 Chassis
- The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Front Axle item # F2070 would be a great suspension system for your 2001 F-53 Chassis. The rubber springs provide cushioning between your suspension components and operate at up to 100 psi. The springs have four layers of reinforced rubber to ensure durability and enhance load support.
I also recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount item # AL74000EZ. Air Lift's...
view full answer... - Recommended Rear Suspension Enhancement For A 2023 Jeep Grand Cherokee
- I recommend the Air Lift 1000 Air Helper Springs # AL60825. These air springs will upgrade your Jeep Grand Cherokee's rear coil spring suspension. The springs will fit inside your existing coil springs and will give you added support when hauling heavy loads. The air springs will also improve handling, braking, and the overall ride. The springs provide 1,000 pounds of load-leveling support.
I linked an installation video below of the Air Lift springs being installed onto a 2015 Jeep Grand...
view full answer... - AirLift 1000 Kit for 2017 Wrangler Unlimited with Mopar 2-Inch Lift with Taller Coil Springs
- The AirLift rear axle air spring kit # AL60817 will not work on your lifted 2017 Jeep Wrangler Unlimited that has taller coil springs but their universal kit # AL60917 will work according to my contact at AirLift. These springs are 4.35 wide x 9-inches tall.
view full answer... - Recommended Jack to Lift a Trailer to Change a Tire
- Trailer stabilizer jacks like # TJSCHD-24 are not designed to be used to lift a trailer and hold it up for maintenance. Their purpose is to stabilize the trailer while it's parked and no more.
What you're looking for is a jack to hold the trailer in the same fashion one would hold your car to change the tire. For this we have several options like the Performance Tool Electric Car Jack # PTW1609 which has a maximum lift of 14 inches and can support up to 4,000 pounds.
If you need an option...
view full answer... - Bulldog Square Jack 22.5K Capacity and Crank Handle
- The Bulldog Square Jack - Fixed Leg - Sidewind - Weld On - 17" Lift - 22,500 lbs # BD1823050383 is a great option for a 4x4 weld on heavy duty jack. It has a wide foot plate that pivots for best support on uneven ground. It has a 17 inch lift. I've linked a video review of the jack for you. The crank # BD8001090283 is sold separately.
view full answer... - Suspension Enhancement For My 2016 Ram 1500 With A 4.5 Inch Lift
- When it comes to installing a suspension enhancement system on your 2016 Ram 1500 The Timbren Rear Suspension Enhancement System # TDR1500DQ will work for you.
This system has a 8,600 pound capacity and improves suspension, handling and safety. It also provides additional support as needed, so you always get a smooth, comfortable ride. This system increases stability and reduces vehicle sag.
When it comes to getting the correct spacer kit for your lift you first need to measure the...
view full answer... - Axle Riser Kit For A 2021 Rpod 190
- After doing some research I found out that your 2021 RPod 190 has a 3,500 Lippert pound axle, so The Axle Riser Kit # LC270682 will work with it.
This lift kit will raise your trailer frame to provide you an additional 3-1/2 inches of additional support between your trailer frame and axle. It is compatible with both side-mount or top-mount torsion axle mounting brackets.
I attached a review video link below.
view full answer... - Replacement Trailer Jack For An Ultra-Fab Electric A-Frame Jack
- For your Ultra-Fab Electric A-Frame Jack w/ 2" Tubing # UF38-944016 (NLA), we have the Ultra-Fab Electric A-Frame Jack # UF38-944017.
This jack has 18" of lift, can support up to 3,500-lbs, and is capable of lifting 1,000-lbs of tongue weight 6" in 25 seconds.
view full answer... - Air Lift Suspension Upgrade For A 2021 Jeep Wrangler
- Yes, we do have just what you're looking for. For your 2021 Jeep Wrangler, we have the Air Lift 1000 Air Helper Springs for Coil Springs # AL60829 which is guaranteed to fit all models of the 2021 Jeep Wrangler.
These springs have a load leveling capacity of 1,000-lbs to add additional support while hauling heavy loads, to improve your braking, handling, and overall ride quality.
view full answer...
Go To Results